_MG_2225.jpg

beavertails

Our beavertail designs have been perfected for well over 10 years, with thousands of trucks on the road with enough miles clocked to take a trip to the sun and back. Some customers on a single truck clocked enough distance for a trip to the moon and back with our AMS body, durability and longevity is what we are passionate about and we strive to show this through our work! AMS is the country's leading supplier of ready made recovery trucks and recovery truck bodies and our best known design the ABT is what put us on the map to becoming what we are today.

our models

The ABT, An open centre style body designed for maximum payload available on any chassis on the market and is our most popular design.

ABT-F A closed centre style body designed for broken vehicles and bikes this design is most popular with accident response workers

The ABT-E (euro tech) Is a closed centre style body design with ramps that are locked in place via a kick out lever.

ABT-H Is our newest design to be part of the beavertail fleet. It features a closed centre design with a hatch to store away the ramps.

4bc539cffd2a4b48fb1bb02aca2f3948.png

For general pricing, visit our ebay page.

(Prices are a general guideline and vary for personal requirements and optional extras, get in contact with us to learn more and receive a quote if needed)

 

the abt

_MG_2228.jpg

The ABT  is an open centre style body which provides you with the ultimate payload for delivering vehicles, average payloads we achieved were around 1500kg  with this set of equipment. This design is our most popular design out of all the equipment we have on offer.

MAIN FEATURES AND OPTIONAL EXTRAS

  • Aluminium plank decking allows for strength a durability, larger and thicker planks are used on our larger vehicles.

  • Optional overhweel strapping system allows straps to avoid sensitive body work and wheel disks giving you more flexibility when it comes to what vehicles you can load onto the bed.

  • Galvanzied extension subframe provides a strong support for the tail end increasing the longevity of the body.

  • Toolboxes are available in metal or plastic varieties with the option of internal lighting.

  • Recovery lights with advanced protocol control helps you stay in control and be seen on the road.

  • Work lights for loading in the dark

  • Air suspension assist, a must have, placed on all of our vehicles, the air suspension allows for a smoother ride and better cornering. If needed a compressor is available to be fitted to allow for frequent control of the system.

  • Our signature fold down light panel for ramp access provides a clean look.

  • Optional led strobes to get the attention of rude users.

  • Large selection of LED Tail lighting is available with the option of progressive style indicators normally seen on higher end cars.

  • Large range of winches are available in a multitude of sizes and colours.

  • Optional Cab barrier with an AMS Flyer

  • Lightweight easy to use ramps

  • Low loading angle, many of our customers take high end sports cars on our beds without issue.

  • Custom coloured grips ensure the best traction when loading up onto our beds.

The ABT comes in multiple variant based on vehicle weight category, the design stays relatively the same but there may be additional features that are legal requirements such as crash barriers.

ABT-35 Designed for vehicles with a GVW of 3.5T

ABT-50 Designed for vehicles with a GVW of 5T

ABT-70 Designed for vehicles with a GVW of 7T

 

the abt-F

_MG_4418.jpg

The ABT-F is a versatile piece of equipment, tackle anything, from road collisions, basic transport to motorbikes. The filled centre provides a clean slick look and provides for those who do more than just transport.

MAIN FEATURES AND OPTIONAL EXTRAS

  • Aluminium plank decking allows for strength a durability, larger and thicker planks are used on our larger vehicles.

  • Optional overhweel strapping system allows straps to avoid sensitive body work and wheel disks giving you more flexibility when it comes to what vehicles you can load onto the bed.

  • Galvanzied extension subframe provides a strong support for the tail end increasing the longevity of the body.

  • Toolboxes are available in metal or plastic varieties with the option of internal lighting.

  • Recovery lights with advanced protocol control helps you stay in control and be seen on the road.

  • Work lights for loading in the dark

  • Air suspension assist, a must have, placed on all of our vehicles, the air suspension allows for a smoother ride and better cornering. If needed a compressor is available to be fitted to allow for frequent control of the system.

  • Our signature fold down light panel for ramp access provides a clean look.

  • Optional led strobes to get the attention of rude users.

  • Large selection of LED Tail lighting is available with the option of progressive style indicators normally seen on higher end cars.

  • Large range of winches are available in a multitude of sizes and colours.

  • Optional Cab barrier with an AMS Flyer

  • Lightweight easy to use ramps

  • Low loading angle, many of our customers take high end sports cars on our beds without issue.

  • Custom coloured grips ensure the best traction when loading up onto our beds.

The ABT-F comes in multiple variant based on vehicle weight category, the design stays relatively the same but there may be additional features that are legal requirements such as crash barriers.

ABT-35F Designed for vehicles with a GVW of 3.5T

ABT-50F Designed for vehicles with a GVW of 5T

ABT-70F Designed for vehicles with a GVW of 7T

 

the abt-E

_MG_3705.jpg

The ABT-E is a versatile piece of equipment, a close relative of the ABT-F model, it sports all the similar design features but uses a different ramp holding mechanism where the ramps use a kick out lever to be held in place.

MAIN FEATURES AND OPTIONAL EXTRAS

  • Heavy duty aluminium plank decking allows for strength a durability, larger and thicker planks are used on our larger vehicles.

  • Three rows of overhweel strapping holes allows straps to avoid sensitive body work and wheel disks giving you more flexibility when it comes to what vehicles you can load onto the bed.

  • Aluminium subframe provides a strong but light support for the tail end, allowing for a greater payload.

  • Sliding winch creates a better safer loading experience.

  • Toolboxes are available in metal or plastic varieties with the option of internal lighting.

  • Recovery lights with advanced protocol control helps you stay in control and be seen on the road.

  • Work lights for loading in the dark

  • Air suspension assist, a must have, placed on all of our vehicles, the air suspension allows for a smoother ride and better cornering. If needed a compressor is available to be fitted to allow for frequent control of the system.

  • Optional led strobes to get the attention of rude users.

  • Large selection of LED Tail lighting is available with the option of progressive style indicators normally seen on higher end cars.

  • Cab barrier with an AMS Flyer

  • Lightweight easy to use ramps

  • Low loading angle, many of our customers take high end sports cars on our beds without issue.

  • Ramp handles for better support in removing the ramps

The ABT-E comes in multiple variant based on vehicle weight category, the design stays relatively the same but there may be additional features that are legal requirements such as crash barriers.

ABT-35E Designed for vehicles with a GVW of 3.5T

ABT-50E Designed for vehicles with a GVW of 5T

ABT-70E Designed for vehicles with a GVW of 7T

 

the abt-H

_MG_5063-HDR.jpg

The ABT-H is a versatile piece of equipment, tackle anything, from road collisions, basic transport to motorbikes. The filled centre creates a clean slick look and provides for those who do more than just transport. The signature hatch for the ramps is what makes the design truly unique, stow away your ramps and lock them in place via a key.

MAIN FEATURES AND OPTIONAL EXTRAS

  • Aluminium plank decking allows for strength a durability, larger and thicker planks are used on our larger vehicles.

  • Ramp hatch with handles that lock via a key provide you with some peace of mind against theft.

  • Optional overhweel strapping system allows straps to avoid sensitive body work and wheel disks giving you more flexibility when it comes to what vehicles you can load onto the bed.

  • Galvanzied extension subframe provides a strong support for the tail end increasing the longevity of the body.

  • Toolboxes are available in metal or plastic varieties with the option of internal lighting.

  • Recovery lights with advanced protocol control helps you stay in control and be seen on the road.

  • Work lights for loading in the dark

  • Air suspension assist, a must have, placed on all of our vehicles, the air suspension allows for a smoother ride and better cornering. If needed a compressor is available to be fitted to allow for frequent control of the system.

  • Optional led strobes to get the attention of rude users.

  • Large selection of LED Tail lighting is available with the option of progressive style indicators normally seen on higher end cars.

  • Large range of winches are available in a multitude of sizes and colours.

  • Optional Cab barrier with an AMS Flyer

  • Lightweight easy to use ramps

  • Low loading angle, many of our customers take high end sports cars on our beds without issue.

  • Custom coloured grips ensure the best traction when loading up onto our beds.

Currently only available for the IVECO Daily in 5T on wards due to design limitations on three and a half tonne Daily's

The ABT-H comes in multiple variant based on vehicle weight category, the design stays relatively the same but there may be additional features that are legal requirements such as crash barriers.

ABT-50H Designed for vehicles with a GVW of 5T

ABT-70H Designed for vehicles with a GVW of 7T

AMS Industrial Estate, Sandall Road

Wisbech PE13 2GB

SAT NAV USERS: PE13 2PS
Phone: 01945 587 818 or 01945 580 364
Email: info@amsrecoverytrucks.co.uk